Digital Super High-Torque Servo 50 Ncm 28g
Control System: | PWM Pulse Width Control |
Processor: | Digital IC |
Required Pulse: | 3 to 5 V Peak to Peak Square Wave |
Working frequence: | 1520 µs /333 Hz |
Rotation angle sensor: | Precision Potentiometer |
Rotation: | Left Rotation: 46, Right Rotation: 46 |
Voltage: | 4.8V to 6.0V |
Temperature Range: | -20? to 60? |
Driver Type: | MOSFET |
Operating Angle: | 45 Deg. one side pulse traveling 400µs |
Direction: | antiClockwise/Pulse Traveling 900µs-2100µs |
Pulse Width Scope: | 900-2100µs |
Neutral pulse: | 1500µs |
Speed:(No-load ): | 0.13sec/ 60° @ 4.8V |
0.11sec/ 60° @ 6.0V | |
Torque:(Stall Full load): | 4.20 kg . cm @ 4.8V |
5.10 kg . cm @ 6.0V | |
Idle Current: | <0.05 A/ 4.8V <0.05 A/ 6.0V |
Running Current: | <0.10 A/ 4.8V <0.10 A/ 6.0V |
Stall Current: | 1.2 A/ 4.8V 1.5 A/ 6.0V |
Motor Type: | Coreless Motor |
Bearings: | Dual Ball Bearing |
Bearing Type: | MR106 (6mmX10mmX2.5mm) |
MR06ZZ (6mmX10mmX3mm) | |
Gear Material: | Titanium Gear |
Servo case: | Nylon |
Plug: | "J" type |
Connector Wire Length: | 260.00 mm |
Connector Wire SPEC: | OD1.2mm/30 x 0.08mm 3p x 260mm "J" type |
Weight: | 28.00 g |
Dimensions (L x W x H): | 35.50*15.00*28.60 mm |