Digital Micro Servo 3g mit SH Micro
Hinweis: dieses Servo führen wir mit 3 verschiednen Steckern:
Sub Micro Servo 3g mit JST-SH Stecker (Pin Abstand 1mm)
Servo Stecker passend zu folgenden Empfängern:
- Steuersystem: PWM Pulse Width Control
- Processor: Digital IC
- Required Pulse: 3 to 5 V Peak to Peak Square Wave
- Arbeitsfrequenz: 1500 µs /333 Hz
- Rotation angle sensor: Precision Potentiometer
- Rotation: Left Rotation: 45°, Right Rotation: 45°
- Spannung: 4.8V bis 6.0V
- Temperatur Bereich: -20° to 60°
- Driver Type: MOSFET
- Operating Angle: 45 Deg. one side pulse traveling 400µs
- Richtung: Uhrzeigersinn/Pulse Traveling 900µs-2100µs
- Pulse Width Scope: 900-2100µs
- Neutral pulse: 1500µs
- Stellgeschwindigkeit: (No-load ): 0.07sec/ 60° @ 4.8V / 0.06sec/ 60° @ 6.0V
- Stellkraft: (Stall Full load): 0.50 kg . cm @ 4.8V / 0.65 kg . cm @ 6.0V
- Ruhe Strom: 0.05 A/ 4.8V 0.05 A/ 6.0V
- Arbeits Strom / Running Current: 0.09 A/ 4.8V 0.09 A/ 6.0V
- Blockierstrom /Stall Current: 0.50 A/ 4.8V 0.50 A/ 6.0V
- Motor Typ: Coreless Motor
- Getriebe Material: Aviation duralumin alloy+POM
- Servogehäuse: ABS
- Stecker: JST SH 1mm Pitch
- Kabellänge: 90 mm
- Gewicht: 3.00 g
- Abmessungen (L x W x H): 19.60 x 8.00 x 16.30 mm
Durchschnittliche Artikelbewertung